iDM EIB/KNX, Technical Documentation Installation Instruction

(C) IDM ENERGIESYSTEME GMBH

Technical manual EIB/KNX

7

D I E

E N E R G I E F A M I L I E

1

2

3

4

5

6

7

8

9

10

11

12

13

1

2

3

Installation

Ins

tall

a

tio

n

3.3. Connection EIB/KNX bus cable on the   

EIB/KNX module

The EIB/KNX- bus cable needs to be clamped on the  

EIB/KNX-module.

No additional power supply is necessary for the EIB/

KNX module, this is done via the EIB/KNX bus con-

nection. 

For the EIB/KNX bus the general restrictions for EIB/

KNX devices are applied.

For the connection of the bus cable to 

the EIB/KNX module the correct con-

nection pole (-/+) has to be used.

bus cable clamps

3.4. Statusanzeige LEDs

LEDs

LED

LED Verhalten

Bedeutung

KNX

LED glowing green

KNX bus voltage present.

LED flickering red

Telegram traffic via the KNX Bus.

LED short-time red

Communication error within the KNX bus.

IP

LED glowing green

Active ethernet-link and valid IP settings on the device.

LED glowing red

Active ethernet-link and invalid IP settings or no IP settings from the DHCP-server to 
the device

LED flickering green

IP telegram traffic.

Mode

LED glowing green

The device is working in normal operating mode.

LED glowing red

Programming mode is active.

LED flashing 1x..10x green

Programming mode is not aktive. manual mode (state BAOS) active.
the chosen BAOS connection (1...10) is free.

LED flashing 1x..10x 
orange

Programming mode is not active. manual mode (state BAOS) active.
the chosen BAOS connection (1...10) is occupied.

LED flashing 1x..5x green

Programming mode is not aktive. manual mode (state BAOS) active.
the chosen tunnel connection (1...5) is free.

LED flashing 1x..10x 
orange

Programming mode is not active. manual mode (state BAOS) active.
the chosen tunnel connection (1...5) is occupied.

LED blinking red

Programming mode is not active. Manual mode not active.
The device was not correctly loaded, e.g. after canceleing a download.

3.5. Scope of deliver y

- EIB/KNX module (KNX IP BAOS 774)

- Technical manual