Electronic Pushbutton Locks
EL740S
© 2017 IDN, Inc. All rights reserved.
0817
A
A
A
A
A
A
A
A
SET
DEL
1
2
3
4
5
6
7
8
9
0
C
35
SETUP MODE
HOW TO DELETE ALL EXISTING PROXIMITY CARDS / REMOTE CONTROLS AT ONCE
(only available for Proximity Card Electronic Deadbolt / Remote Control Electronic Deadbolt)
Steps are as follows:
1. Press and hold [SET] button for over 2 seconds.
The Red LED will light up and beep twice. You are now under setup mode.
2. Enter 123456 (or current programming code) and then press button .
Enter [41] and press button .
Press and hold button until a beep is heard.
The Red LED will light up for 10 seconds.
The lockset will delete all existing cards and remote controls.
Note:
1.The lockset will go back to the standby status if no
button is pressed in 10 seconds after accessing setup mode.
2.If any card / remote control is lost, for your safety, please
delete all cards/ remote controls and re-add current cards /
remote controls excluding the lost one.
C
A
A
A
A
A
A
A
A
SET
DEL
1
2
3
4
5
6
7
8
9
0
C
36
HOW TO DIABLE ALL EXISTING CODES/ CARDS/ REMOTE CONTROLS (VACATION MODE)
Steps are as follows:
1. Press and hold [SET] button for over 2 seconds.
The Red LED will light up and beep twice.
You are now under setup mode.
2. Enter 123456 (or current programming code) and then press button .
Enter [50] and press button .
3. Enter [0] and press button .
The Red LED will light up for 10 seconds. The lockset will turn on vacation mode.
4. Enter [1] and press button .
The Red LED will light up for 10 seconds. The lockset will turn off vacation mode.
(default vacation mode is off)
SETUP MODE
Note:
1.The lockset will go back to the standby status if no button
is pressed in 10 seconds after accessing setup mode.
2.Vacation mode is used to disable all user codes at the keypad.
If a valid user code is entered while the lock is in vacation mode,
the lock will not be unlocked. If you will be away from your home for a
period of, it is a good idea to use vacation mode to prevent repeated
access attempts.
All manuals and user guides at all-guides.com
