Quantis Appliance User Manual
Document version : 2.13
Distribution : Confidential
Date : 06.08.2020
Page: 10 / 47
2.3
Configuration Interface
The configuration of the system is done through a Command Line Interface (CLI). It uses the serial COM
port of the appliance. Use the provided USB to Serial COM port and connect to your computer.
2.4
Random numbers interface
The random numbers are available on the LAN1 interface. For this connect the provided Ethernet cable
to your LAN.
3
Getting Started
3.1
Installation
3.1.1
Physical Installation
In order to install the Quantis Appliance, please perform the following steps:
1) Plug the power cable in the Power supply socket.
2) Plug the Ethernet cable in the Ethernet slot LAN1.
3) Connect the USB to Serial converter in the COM port for configuration.
4) Turn on the QA using the button in the front panel.
The appliance takes around 1 minute to boot.