●
Search mode
Select Search mode icon at the FM mode menu, and then press
Mode
to enter Search mode interface.
Freq Mode
function
：
Push Last/Next button and the player forward or backward single step 100KHZ to manual search
station
；
Push on Last / Next button for about 2 seconds, and the player scans forward or backward per
100KHz, and stops at the scanned station.
If you want to stop scanning, push
Pre / Next
switch to
stop.
Search station
function
：
If the player exist more than one station, Pushed
Pre/Next
button to listen to the station.
Auto Search
function
：
When selecting Auto search function, the player can auto scanned frequency between 87.5MHZ and
108MHZ and save to scanned station
●
Search level
There has eight grade, Auto search starch station demand to signal intensity more high when the grade
more high
●
Save
Save station is manual scanned in sequence, US Band and Japan Band can save maximum 20
stations respectively.
●
Delete
Delete station is exit
。
●
Select band
At the FM submenu, select the icon and press
Mode
button to enter the Select band interface, then push
Next
button to choose US Band (FM87 - 108MHz) or Japan Band (FM76-90MHz), again press
Mode
button to confirm finally.
●
FM REC type
In the FM tune, choose the icon of “Fine Rec”/”Long Rec” and press “MODE”. Long press MODE to save
the recording file.
FM Delete.
1.
At Stop Interface.
（
No Stop Interface exists at FM Mode.
）
2.
Press
Mode
to enter Stop Submenu.
3.
Press
Next/Pre
to select “Delete” or “Delete All”.
4.
Short Press
Mode
to enter Delete Interface.
5.
Press
Mode
to confirm and deletion starts.
8.
Browse of JPEG
a.
File selection:
Enter the file selection
Press the “play” button and browse JPEG
