background image

38

7 - OPERATION AND USE

7.2 

 RANGE OF APPLICATIONS

 

Cooling of internal and external areas (only coverage) such as: bars, restaurants, swi-

ming pools, discos, theme parks, meeting places, poultry farms, livestock farming, ma-

chine shop and industries.

 

Humidification of internal and external areas .

WARNING!

DON'T USE IN ENVIRONMENTS WHERE EXPLOSIVE POWDERS ARE PRESENT. DON'T USE 

TO DISTRIBUTE TOXIC CHEMICALS OR PRODUCTS THAT CAUSE HARM TO PEOPLE OR THE 

ENVIRONMENT. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY 

IMPROPER OR INCORRECT USE OR FAILURE TO OB-SERVE THE RULES SET OUT IN THIS 

MANUAL.

7.3  

WORKING LIMITS

Prolonged inactivity (machine stopped) with temperatures lower than 5°C (5 degrees cen-

tigrade) can cause damage or breakage to the pump, hoses, and to the parts in general. It 

is therefore advisable to empty the system completely. For more information contact the 

retailer or manufacturer.

7.4  

WATER CONNECTION TO THE MACHINE

The machine is connected to the system using water hoses still closed dimensioned accor-

ding to the flow and pressure to which the system should work. 

The pipes laid shall not have any bending. 

Serial connection to the water supply is carried out by a female fitting 3/8 "

7.5  

LABELS

On the machine and manual signs and pictograms are shown in order to highlight or draw 

any hazardous situations or behaviors to be followed for safe operation. 

WARNING! 

NEVER PUT ANY PART OF THE BODY AND / OR OBJECTS THROUGH THE OPENINGS OF THE 

FAN, WHERE THERE IS A NEED, YOU MUST FIRST DISCONNECT THE POWER SUPPLY. 

WARNING! 

NEVER REMOVE THE SAFETY DEVICES WITHOUT FIRST DISCONNECTING THE VOLTAGE AND 

ABSOLUTELY DO NOT TURN ON THE MACHINE WITHOUT THESE DEVICES.

7.6  

TRAINING

It is the responsibility of the owner and/or supervisor to assign an operator and train him 

in the use of the machine according to the instructions in this manual.
WARNING!

THE SYSTEM MUST BE USED ONLY BY A TRAINED OPERATOR, WHO USES THE MACHINE IN 

ACCORDANCE WITH THE INSTRUCTIONS CONTAINED IN THIS MANUAL AND/OR THE MA-

NUAL FOR ANY EXTERNAL EQUIPMENT. NO LIABILITY SHALL BE ACCEPTED FOR ANY IMPRO-

PER USE OF THE MACHINE NOT ENVISAGED IN THIS MANUAL.

GB

Cop

yright ©2017 Idr

obase Gr

oup

. All rights r

eserv

ed

.

Summary of Contents for AURORA



























Reviews: