INTRODUCTION
IDS Ingegneria dei Sistemi S.p.A.
MNG/2017/009 Rev 1.1 4/ 54
1
INTRODUCTION
This document describes the HYDRA system (
Hy
per
D
efinition
Ra
dar
), and
particularly refers to the concepts the user should learn before initiating
the utilization of this device. Therefore we recommend reading the entire
document before starting the system.
1.1
Purpose
Reading this document will provide all the necessary knowledge to install
and maintain the HYDRA system. It particularly presents a step by step
procedure to install the system, information for a safe use of the system
and instructions for its general maintenance.
1.2
Application field
This document applies to the installation of the HYDRA system in all its
configurations:
•
Hydra G HP
for monitoring of Quarries, Open pit mines, Landslides
and Cut-slopes;
•
Hydra G LP
for Building monitoring;
•
Hydra U
for monitoring of Tunnels and Underground mines.
1.3
Authorization for use
–
national restriction
The use of HYDRA system is subject to authorization by the Competent
Ministry of the country where the system will be used.
For more details with reference to the restriction, please refer to the
following website:
https://www.efis.dk/views2/search-general.jsp
1.4
CE Marking
This equipment is in compliance with the
essential requirements and other relevant
provisions of Directive 2014/53/UE.
The full Declaration of its Conformity can be
found either on the CD or a separate
document included with this product.
This is a Class A product. In a domestic
environment it may cause radio interference.
If so, the user may need to take adequate
measures.
