©
2
0
2
0
In
te
llig
ent
D
ig
ita
l S
er
vic
es
G
mbH
V
e
rs
io
n
1
.0
•
Press [LEARN], the Gateway will respond with a beep.
•
Now press [OFF] (0) on the RF power switch; if the signal is recognized by
the Gateway, it will respond with another beep; the [SAVE] and [SEND]
buttons will be activated.
•
If learning is not successful, an error message in
red
will be shown; try
again.
•
For some types of RF devices, the Gateway will automatically generate a
complementary pair of [OFF] and [ON] commands, otherwise the learning
procedure must be repeated for the [ON] (I) command.
•
Click on the [SEND] button for testing the function of the newly learned
command; if the new command does not work, press [CLEAR] and try to
learn again.
•
Click on the text input line and type in a useful name for this command, then
press [SAFE].
◦
Hint: The [SAFE] button refers only to the individually entered card
name. No need to use [SAFE] if you prefer to use the automatically
generated default names.
•
If you need to delete one of the learned commands, use the corresponding
[CLEAR] button.
If you selected a [Socket learnable] option, use the following steps:
•
Press the [GENERATE] button, the Gateway will respond with a beep.
•
Take the power socket and press down the combined LED/button unit at
the side of the socket while plugging it to mains power. Keep the button
pressed for three seconds.
•
If you release the button now, the LED will blink.