background image

 

 

 

©

2

0

2

0

 In

te

llig

ent

 D

ig

ita

l S

er

vic

es

 G

mbH

 V

e

rs

io

1

.0

 

than 4 client devices at the same time. Compared to a normal home WiFi router, the 
internal AP is likely to be inferior in terms of signal strength and range.)

 

13.8

 

Reset all user settings to factory values

 

Only use this menu if you are sure that you want to really delete all user settings and 
configurations. There will be no way available to recover the deleted settings from 
any backup data.

 

 

14.

 

Troubleshooting

 

- I tried to skip the changing of the default password at the beginning of the 
installation procedure, but now I cannot use the Gateway V1 device.

 

For security reasons, the device does not allow connecting to a home router or using 
the RF/IR/WiFi controlling features if the default password “admin” is still valid. 
Please change the password and choose an own one. This is meant as a security 
measure for your home network, to prevent unauthorized users from entering this 
device’s menu too easily.

 

-The Gateway V1 did not connect to my home router, I cannot find it using the URL 
“http://Gateway_V1” in my browser.

 

Please check if the AP of the Gateway V1 is still active. If connection to the specified 
home router is not possible, the AP will remain active, so you can still log in via the 
AP and repeat the procedure of scanning and trying to connect to the external WiFi 
router. Maybe it was just a typo in the password that you entered…

 

You may also use the configuration pages of your home router, to check if a device 
named “Gateway_V1” has been granted connection on your router. If this is the 
case, you have the additional option to use the IP address that the router assigned to 
the Gateway V1, in order to call it on the URL line of your browser.

 

The reception of RF signals is unreliable.

 

Summary of Contents for Core Smart Home Gateway V1






















































Reviews: