January 2020
11
Technical Manual: GigE uEye SE Rev. 4
6 Mechanical specifications
The mechanical data for each camera model can be found on our
directly at the respective camera
model beneath in the "Downloads" tab.
Fig. 1: GigE uEye SE Rev. 4
NOTICE!
The camera connectors may be damaged if you install or remove the camera with
plugged in cables. Therefore, first unplug the GigE and/or I/O cable from the camera.
NOTICE!
Make sure to avoid mechanical or electrical damage of the printed circuit board or
its connections. Do not touch the printed circuit board while it is powered. Always hold the
board by the edges to avoid the risk of electrostatic discharge damage.
The applicable tolerances for the overall dimensions of PCBs are higher than the tolerances
for housing dimensions.
