IDS Ingegneria Dei Sistemi S.p.A.
N. doc.: MN/2009/056 - Rev. 1.1
RIS Hi-Mod / DUALF-400-900 - Installation Guide
and User Manual
24
/
44
To build the frame carrying the antennas you need the equipment shown in Fig.
1.15.
Fig. 1.15 – Two Antennas frame equipment
Take one of the wheeled frames and screw two connection pipes in it. Connect
these pipes with the non-wheeled frame (the white spots on it show you which
side goes down). Link the other two connection pipes and finally close the box
with the other wheeled frame.
Fig. 1.16 shows you how to build the box.
Now take the rudder and put it in the metallic connections of the wheeled frames.
Be sure to lock it with the knobs showed in Fig. 1.17.
The locking devices are the two knobs with a little button in their centres: you
have to push it , insert the knob in place and then release it.
