IDS Ingegneria Dei Sistemi S.p.A.
N. doc.: MN/2009/056 - Rev. 1.1
RIS Hi-Mod / DUALF-400-900 - Installation Guide
and User Manual
29
/
44
Take one of the wheeled frames and screw two connection pipes in it. After that
close the box using one of the non-wheeled frames as shown in Fig. 1.23.
Fig. 1.23 – Side antenna frame
Unite the side frame with the central one by linking the metallic locks with the
wheels “mushrooms”. Lock up the structure by turning the switches (Fig. 1.24).
Do the same operations to build and place the box on the other side.
Fig. 1.24 – Main frame “mushrooms” & locking device
Take the antennas and make them slide in the side frames from behind. Remember
to put and remove the antennas always from the rear part of the frames. When the
antennas are in place lock them around the connection pipes using their hooks
(Fig. 1.25).
“Mushroom”
Locking
device