©
2
0
2
0
Int
ell
ig
ent
D
ig
ita
l S
erv
ic
es
G
m
bH V
e
rs
io
n
1
.0
8.
The Infrared commands
[
IR] via TV
Remote Controls will be trained in a
similar way, except there is no need to
choose between a switch or a socket
before learning.
9.
You can even combine various functions
under [Routines] and even link the same
with [TIMER].
A: Program more Sockets, Light Switches, and IR Devices
1.
For the other Power Socket, you can now repeat the
same process.
2.
To pair the Power Socket with a 433Mhz Switch,
take the power socket and press down the LED/button
unit like explained above at the side of the socket while
plugging into mains power. Keep the button pressed for 3
seconds! If you release the LED/button, the LED will blink.
4.
Enjoy!
3.
Take the RF wall switch and press the “on” [ I ] side to pair
the Power Socket with a 433Mhz Switch.
4.
If the power socket recognized this signal
successfully, the LED will stop blinking, and learning
is complete.
If you have any questions, please contact us:
Intelligent Digital Services GmbH
Maria-Goeppert-Str. 5
D-23562 Lübeck
Germany
www.ids-digitaltv.de
+49 (0) 451 489 78 323
Monday-Friday: 08:30 - 17:00 (
GMT
+
1)
5. Contact and FAQs
Note: The Power Socket will keep other pairing commands under section 3. intact.
A: FAQs
Q1: Why can’t I see the login page after entering
http://192.168.55.1/m_lo.html ?
A1: Make sure your
computer or smartphone is
connected to the Gateway’s network
and you
have entered the SSID password [
123456789].
Q2: Why can’t I see the login page after entering
after
I added the
Gateway into my home Wi-Fi network?
A2: Make sure your
computer or smartphone is
connected to your home Wi-Fi network back
again
and make sure you have used your correct
Wi-Fi Password of your home network.
Q3: I still can’t see the login page after entering
http://gateway_v1/m_lo.html, even
after
I
added the Gateway into my home Wi-Fi
network?
A3: Get the assigned IP Address of the gateway
in your home Wi-Fi network like this:
a)
Re-Start the Gateway
b)
Wait until the gateway stops blinking
c)
Open the wireless network connections of
your compute or phone and connect to
your gateway again and connect to
http://192.168.55.1/m_lo.html
d)
After login please go to [Information]
[WLAN] and [IP]. Take this IP Address and
enter it directly into your browser.
