SOMETHING TO READ BEFORE SETTING UP !
The aim of this manual is for you to be able to install and start up your processor
as efficiently and quickly as possible. Most of the options and functions are
described. Should anything be missing call the company. Most of the options and
functions are described. By a careful reading of this manual, in particular the part
dedicated to installation, will assure a perfect set up of your machine.
Test or loan period of the equipment:
IDT Sound Processing Corporation has loaned you a processor. This loan is not
invoiced but care must, naturally, be taken to make sure that it is returned to IDT
Sound Processing Corporation in exactly the same condition it was delivered to
you.
-
The original packaging must be used, including the plastic protector bag. IDT
Sound Processing Corporation could be invoiced.
-
Avoid damaging any part of the equipment (paint, aluminium etc), clean with
non-corrosive products. Protect the equipment from other elements by, for
example, placing polystyrene pads between different boxes.
-
The processor will have been delivered with an install CD, this manual, the
packaging case, an RS232 cable and a mains cable. Should any of these be
missing IDT Sound Processing Corporation could invoice the part that is not
returned.
Packaging and return of the equipment.
-
We prefer you use the original packaging which has been fully tested to
endure extreme conditions. IDT Sound Processing Corporation only sends
equipment after repairs or upgrades in this packaging. Should you return the
equipment in a different packaging IDT Sound Processing Corporation
reserves the right to invoice you.
-
If you are only returning a machine for repair or upgrade do not send any of
the cables, nor CD nor manual. However, it is essential that you enclose as
much information as possible concerning the technical problem.
-
Should you decide to return the equipment definitively you must contact the
sales department of IDT Sound Processing Corporation to obtain the partial or
total refund of the equipment and enclose all parts pertaining to the
equipment (cables, CD, manual) along with an explicatory note for the sales
department.
3
