Section 5
READING MODE SETTINGS
Hand-held Mode
:
Press and hold the trigger to read. Complete one read
or release the trigger to terminate reading status.
Auto Mode
: When the ambient luminance changes in front of the engine,it
automatically initiate reading. After completion of reading, the engine goes
to idle. Both luminance change and the Trigger can initiate reading when
idle.
Continuous Mode
: Press
the trigger to start reading. The engine will keep
reading. To stop, Press trigger again.
Code Programming On
Auto Mode
Code Programming Off
Continuous Mode
Note
: Programming sequences:
1. Read
“Code Programming On”
2. Read pro
gramming code, such as “Auto Mode”
3. Read
“Code Programming Off”.
