4
4
9
9
DESCRIPTION
This slot reader can scan and decode most popular bar codes, as well as read
1, 2, or 3 tracks of magnetic stripe information. It also has full data editing
capabilities.
It can be connected to a single-ended serial device, such as a cash register,
PC, or terminal, through an RS-232 serial port. This unit is fully program-
mable through a serial utility program, such as Hyper Terminal (in Windows).
The data can be formatted with preamble/postamble and terminator charac-
ters to match the format expected by the host.
Power is obtained from a separate power supply module when the unit is
configured as an RS-232 device.
Terminal Selection Type
RS-232 (serial)
General Selection
Beep Volume
High
Intercharacter Delay
5 milliseconds
Interblock Delay
0 milliseconds
Language
United States
Code ID
Off
Scan Verification
Off
Function Code
Off
Message Formatting
Terminator Character
<CRLF>
Preamble
None
Postamble
None
RS-232 Port Settings
Baud Rate
9600
Data Bits
8
Parity
None
Handshaking
X-On/X-Off
Stop Bit(s)
1
X-On
DC1 (\11)
X-Off
DC3 (\13)
Magnetic Stripe Selections
Track Selection
Any Track
Start/Stop Sentinel
Send
Track 2 Send Account
Number Only
Not Limited to Account No.
Track Separator
<CR>
Code 39
Enabled
Full ASCII
On
Check Digit
Off
Send Check Digit
No
Send Start/Stop
No
Minimum Length
1
Maximum Length
60
Terminal Selection Type
RS-232 (serial)
General Selection
Beep Volume
High
Intercharacter Delay
5 milliseconds
Interblock Delay
0 milliseconds
Language
United States
Code ID
Off
Scan Verification
Off
Function Code
Off
Message Formatting
Terminator Character
<CRLF>
Preamble
None
Postamble
None
RS-232 Port Settings
Baud Rate
9600
Data Bits
8
Parity
None
Handshaking
X-On/X-Off
Stop Bit(s)
1
X-On
DC1 (\11)
X-Off
DC3 (\13)
Magnetic Stripe Selections
Track Selection
Any Track
Start/Stop Sentinel
Send
Track 2 Send Account
Number Only
Not Limited to Account No.
Track Separator
<CR>
Code 39
Enabled
Full ASCII
On
Check Digit
Off
Send Check Digit
No
Send Start/Stop
No
Minimum Length
1
Maximum Length
60
DESCRIPTION
This slot reader can scan and decode most popular bar codes, as well as read
1, 2, or 3 tracks of magnetic stripe information. It also has full data editing
capabilities.
It can be connected to a single-ended serial device, such as a cash register,
PC, or terminal, through an RS-232 serial port. This unit is fully program-
mable through a serial utility program, such as Hyper Terminal (in Windows).
The data can be formatted with preamble/postamble and terminator charac-
ters to match the format expected by the host.
Power is obtained from a separate power supply module when the unit is
configured as an RS-232 device.
