NEO 2 Interface Developer’s Guide
518
Rev. 57
06/07/2018
•
Add command 02-09, 02-58 (Used for MCL Data Exchange)
Rev. 58
06/07/2018
•
Amend the Removal Tamper Configuration (04-22) information.
•
Remove note from Command 60-10 to fix NEOII-1358.
Rev. 59
06/22/2018
•
Comprehensive copy edits, formatting adjustments.
•
Remove several obsolete Appendices.
•
Remove Smart Tap section and refer to external document.
Rev. 60
06/29/2018
•
Add 60-17 and 60-18 commands.
•
Delete DFEE44 from Group 80.
Rev. 61
06/29/2018
07/03/2018
•
Change DFDE04 as DFEF04.
•
Add Appendix of Enhanced Encrypted MSR Data Output Format for Financial and
Non-Financial Cards.
•
JCB default value of DFEE4C is 0E.
•
Remove max size limitation on 84-07 command.
Rev. 62
07/06/2018
•
Add commands 2C-19, -1A, -1B, -1C.
Rev. 63
07/12/2018
07/16/2018
•
Add command 83-41.
•
Add additional items to response table for command 61-01.
Rev. 64
07/23/2018
•
Add Set 24-hr Self-Check Time to command 25-07.
Rev. 65
07/24/2018
•
Updated command information for 81-0B, 81-0C, and 81-0D
Rev. 66
07/30/2018
08/10/2018
•
Remove Vendi and Kiosk III tags and commands.
•
Remove (for now) references to ADF.
•
Clarify tag 'E1' usage.
•
Remove DFEE39.
•
Remove warning about key erasure in 04-09 discussion.
•
Clarify DF811B.
•
Update Gen PAN command to show bit 7 usage in byte 1.
Rev. 67
08/17/2018
•
Remove Visa commands 04-0C, -0D, -E and 03-0C, -D, -E.
Rev. 68
08/20/2018
08/26/2018
08/31/2018
•
Remove commands 25-01, -02, -03, -04 (clock set/get time, set/get date).
•
Modify bit 7 of byte 1 of 83-41 response to reflect encrypted PAN only.
•
ACT TLVs table 36 updated to eliminate DF31, DF32 in favor of DF812A, DF812B.
Also, DFEF7F is added.
•
Remove warning about CAPK erasure in 04-09.
•
For 2C-12, 2C-13, 2C-18, change the SAM support number to 8
•
Add New Pass Through Command for VP5300M Motor Control:
•
2C-70: Bypass Data to Motor
•
2C-71: Entry Motor Boot Mode
Rev. 69
09/07/2018
•
Remove commands FO-00, -01, and -0F.
•
Add note about VP3600 to F0-02.
•
Add note about RS-232 mode for F0-03.
Rev. 70
09/11/2018
•
Remove commands C7-10, -12, -13, -16, and -23. (Obsolete.)
Rev. 71
11/08/2018
•
Remove C7-2F, per JX advice.
