28
10.4 SETTING MAXIMUM NUMBER OF CARDHOLDER IDS
You can set the maximum number of cardholder IDs that can be registered on the
FINGER007SRB
.
By default, the
FINGER007SRB
is set to store up to 10,000 cardholders and 50,000 events and you
can adjust this setting to increase the cardholder capacity at the expense of event memory.
To change the ID memory setting, enter the Setup Mode. Press
<F3>
, and then press
<6>
4 times
until you can see “
5.ID memory
” (Figure 1) on the LCD.
Once the
5.ID memory
item appears on the
LCD, press
<ENT>
, and press
<4>
or
<6>
to select “10000/50000”, “20000/40000”, “30000/30000”,
“40000/20000” or “50000/10000” (No. of IDs / No. of events), and then press
<ENT>
again to confirm.
NOTE : Prior to changing the maximum number of cardholders, you must clear the event data
from the memory. Because entering the Setup Mode itself generates an event, you must
always initialize the event memory prior to changing the maximum ID number setting. If you
attempt to change the setting with some event data still in the memory, the LCD will display
“EVENT MEMORY NOT EMPTY” (Figure 2) error message.
NOTE: If you attempt to reduce the ID memory size to a value lower than the current number
of IDs stored in the memory, the LCD will display the “ID TOTAL COUNT WRONG” (Figure 3)
error message. In this case, please clear the card data from the memory.
Figure 1. Figure 2. Figure 3.
10.5 REGISTERING CARDHOLDER IDS
To add new cardholder IDs to the
FINGER007SRB
, enter the Setup Mode, press
<F3>
. Once the
“
1.
REGISTRATION
”
item appears on the LCD, press
<ENT>
to begin the ID registration process.
For detailed information on the ID registration process, please refer to
12.3.1 REGISTRATION
.
5. ID MEMORY
10000/50000
EVENT MEMORY
NOT EMPTY !!!
ID TOTAL COUNT
WRONG !!!
Summary of Contents for Finger007SRB
