19
12-63. Set AUX#2 Input Detection from ‘L’ to ‘H’
AUX#2 input is detected on the rising edge of AUX#2 input
Configuration Card / Configuration PIN
12-64. Set AUX#2 Input Detection from ‘H’ to ‘L’
AUX#2 input is detected on the falling edge of AUX#2 input
(Default setting)
Configuration Card / Configuration PIN
12-65. Set AUX#3 Input Detection from ‘L’ to ‘H’
AUX#3 input is detected on the rising edge of AUX#3 input
Configuration Card / Configuration PIN
12-66. Set AUX#3 Input Detection from ‘H’ to ‘L’
AUX#3 input is detected on the falling edge of AUX#3 input
(Default setting)
Configuration Card / Configuration PIN
12-67. Set Exit Button Input Detection from ‘L’ to ‘H’
Exit Button input is detected on the rising edge of Exit Button input
Configuration Card / Configuration PIN
12-68. Set Exit Button Input Detection from ‘H’ to ‘L’
Exit Button input is detected on the falling edge of Exit Button input
(Default setting)
Configuration Card / Configuration PIN
12-69. Set Door Contact Sensor Input Detection from ‘L’ to ‘H’
Door Contact input is detected on the rising edge of Door Contact input
Configuration Card / Configuration PIN
12-70. Set Door Contact Sensor Input Detection from ‘H’ to ‘L’
Door Contact input is detected on the falling edge of Door Contact input
(Default setting)
Configuration Card / Configuration PIN
12-71. Activate TTL Output to ‘H’
TTL output changes the state from logic '0' to logic '1' when it activates.
Configuration Card / Configuration PIN
12-72. Activate TTL Output to ‘L’
TTL output changes the state from logic '1' to logic '0' when it activates.
(Default setting)
Configuration Card / Configuration PIN
12-73. Enable Keypad Input To Enter ID Number
Keypad input is enabled to enter the ID numbers through keypads.
Configuration Card / Configuration PIN
12-74. Disable Keypad Input To Enter ID Number
Keypad input is disabled to enter the ID numbers through keypads.
(Default setting)
Configuration Card / Configuration PIN
Summary of Contents for iPass IP100W
Page 1: ...User s Manual ...
Page 31: ...31 17 Template MEMO ...
