26
[External Device]
●
Problem
The exit button won’t work.
●
Cause
▶
Incorrect connection between the exit button and the 100W
▶
Malfunction of the exit button
▶
Internal circuit may be damaged or malfunctioning.
●
Solution
☞
Check the connection between the exit button and the 100W.
☞
Check the operation of the Exit Button.
1. Check the wiring between the Exit Button and the 100W to see if there is any short circuit or cutoff.)
2. Try connecting the two wires connected to the Exit Button..
- If the 100W responds when the exit button is pressed, replace the exit button because it is faulty.
- If the 100W does not respond, the 100W is malfunctioning. Initialize the product.
●
Problem
An RF card is successfully recognized by the exit reader, but the data transmission to the PC fails or incorrect data is
transmitted.
●
Cause
▶
Incorrect connection between the exit reader and the 100W
▶
Communication error
▶
Malfunction of the exit button
Make sure to use an NO (Normally Open)-type exit button.
Caution
Upon initialization, all data default value will be restored.
Caution
See “Installation” to connect the exit button.
NOTE
Summary of Contents for Star 100W
Page 1: ...User s Manual...
Page 31: ...31 17 Template MEMO...
