20030516
User’s Manual
14
STAR FINGER007
5.2 BACKUP BATTERY S/W
FINGER007(of V4.70 or higher) has a S/W(reverse side – Template hole) for the backup battery
connection, which is left open circuit to prevent any current consumption of backup battery(Figure : S/W
setting). Before the FINGER007 installation, it needs to be connected so that backup battery can retain the
memory during power failure.
Figure
: S/W SETTING Figure
: S/W location
5.3 SYSTEM INITIALIZATION (Extra Reader Port)
You must operate H/W initialization, before the FINGER007 installation.
Of V4.70 or higher, you must connect battery backup S/W in reverse side before H/W initialization.
You can H/W initialize using extra reader port. First, turn off the system power and connect 3 wires (pink,
cyan and black(GND)), and turn on the system power. Then you can hear “Initialize beep” and display
picture.
1. : If you want H/W initializing, enter key
<1>
.
2. : Enter initial master password(
<3141>
).
3. : Showing initializing.
4. : After initializing – Main power
OFF
and separate 3 wire and main power
ON
again.
5.4 WIRING
5.4.1 POWER
Errore.
System Initialize
1 – Yes, 0 - No
Errore.
Master Password
[ _ _ _ _ ]
Errore.
System
Initializing...
Errore.
System is Clear
Remove Wires!!
