20030516
User’s Manual
35
STAR FINGER007
M ASTER ID CHANGE
MASTER ID CHANGE
WAITING NEW MASTER CARD
CARD
EXIST MASTER ID?
YES
CERTIFICATION OLD MASTER
SUCCESS?
YES
WAIT NEW MASTER FINGERPRINT
(FIRST TIM E, SECOND TIME)
NO
SUCCESS?
NO
(M ASTER ID : "00000000"
P/W : "3141")
NO
ENTER NEW MASTER P/W
YES
END M ASTER ID CHANGE
WAITING NEW MASTER ID
KEY
9.1.10 SYSTEM INITIALIZE
`
9.1.11 CARD ID CLEAR
SYS INITIALIZE
Sys Initializing
1 – Yes, 0 - No
System
Initializing …
. This operation will initialize the
FINGER007
. Press
<ENT>
key, if an
initialization is needed. (First time installation or resetting in the event of a
malfunction)
A
fter the initialization,
FINGER007
will return to the setup menu
.
CAUTION : Initializing will erase all stored data in the memory
.
(ID, EVENT, T/S, In/Out define, etc...)
Card ID Clear
1 – Yes, 0 - No
CARD ID CLEAR
.
When you want to delete all User ID (Card ID), you can clear all User ID
from the memory. Press <ENT> key then press <1> key to clear all User ID
or <0> key to cancel the operation.
CAUTION
: Before you clear all User ID, make sure that the registered
User ID is no longer used otherwise you may lose all registered
User ID.
