Operation
p.21
1. All LEDs are lit red, then they flash on and off twice and stay on.
The RFL200C / IP-RFL200C beeps twice.
4
When a tag is read on the RFL200C / IP-RFL200C whil
e the door is open.
1.
The first two LEDs from the top still stay lit green, indicating the open status of the doo
r.
2.
The rest of the LEDs indicate the authentication status (access granted or denied).
5
When you need to know the Board ID (or Communica
tion Address),
1.
Connect the purple and blue wires together while power is not supplied.
2.
Apply power and, the first LED flashes on and off either red or green, and the rest of th
e LEDs show the Board ID.
3.
After checking the Board ID, power off the RFL200C / IP-RFL200C and return the purpl
e and blue wires to their original positions.
4.
Power on the RFL200C / IP-RFL200C again, and it will operate normally again.
Example
Summary of Contents for Star IP-RFL200C
Page 1: ......
Page 9: ...Identifying Supplied Parts 4 p 6 Please unpack and check the contents of the box ...
Page 13: ...p 10 ...
