6.3.VGA mode
□
VGA mode 640 x 480 pixels are cut out from all pixels and output.
□
There are fewer lines and the frame rate goes up to 105.51fps.
□
Set to VGA mode with a communication command.
□
The start position can be set by communication command both horizontally and vertically.
Horizontal start position address: 42 – 43 h
Vertical start position address: 40 – 41 h * Similar to partial scan mode
□
Set the start position to 2 x n.
However,
Satisfy the horizontal start po 640 <= 1284.
Satisfy the vertical start po 480 <= 962.
* The initial data of the horizontal start position is 0000 h and the center position is 0140 h (320).
□
The shutter mode operates as follows.
Address: 01 h
Normal shutter mode
Data 00-02 h: 1/105s (OFF)
Subsequent data is the same as in full frame scan mode
Fixed shutter trigger mode
Data 00-01 h: 1 / 89s (OFF)
Subsequent data is the same as in full frame scan mode
Data: 0F h Manual shutter,
Address: 24 – 25 h, data (set value) 01E2 h (482) or higher
9
62
L
in
e
1284pixel
4
80
L
in
e
640pixel
