37
This log shows the history of the operation
statuses in chronological order. What the
following entries represent is detailed below.
ON:
Switches on the device.
OFF:
Turns off the device.
REC:
Starts recording.
STOP:
Ceases recording.
STOP-P:
Ceases playback.
PLAY:
Shows recorded video.
V-IN:
Video input is connected.
V-LOSS:
Video loss occurs.
P-LOSS:
Power interruption occurs.
A-IN:
Detects an alarm input.
LOCK:
Disables the entire front panel
controls.
UNLOCK:
Releases the key lock.
UPDATE:
Updates system software.
Note: The log keeps an operation history on a
revolving basis because of a limit of 4000.
When the log is full, the newly registered
record of an operation will replace the
existing records from the oldest one
onwards.
OSD LANGUAGE:
This option allows you to select the OSD
language display as
English
or
Chinese
.
MENU BACKGND:
There are
3
levels of background color
transparency you can choose from: level 1 is
totally transparent, level 3 is opaque, and level
2 is between levels 1 and 3. The background
color is used in the setup menu and search
function.
BUZZER:
This option determines the embedded buzzer
sounding a tone to signal the following
situations. A tone lasts about two seconds.
ON:
Enables buzzer.
OFF:
Disables buzzer.
Situation
Alarm occurs
Video loss occurs
Disk is full
Load factory default
Buzzer is set to ON
Enables/disables the key lock function
Power on /off in a mobile rack HDD
Backup operation is complete
Timer activates/deactivates
Recording is switching between HDDs
PASSWORD:
This option allows you to set a password to
prevent any unauthorized re-formatting of the
hard disk drives or use by a network viewer.
The standard password is “9999”.
OLD PASSWORD:
Enter the pre-set
password (or the standard
password if this is the initial setting)
to access the password setting
system.
NEW PASSWORD:
Enter a 4-digit-number
password of your choosing which
will replace the pre-set password
(or the standard password “9999”).
SETUP PWD:
When this option is on, the user must pass the
password check before entering the setup
menu.
ON:
Enables pass protection for the setup
menu.
OFF:
Disables pass protection for the setup
menu.
OPERATION LOG
05/15/04 18:19:30
ON
05/15/04 18:19:36
OFF
05/15/04 18:23:10
ON
05/15/04 18:23:50
REC
05/15/04 18:25:05
STOP
05/15/04 18:27:12
V-LOSS
05/15/04 18:50:30
PLAY
05/15/04 18:51:20
STOP-P
^ v
SELECT
<
PAGE UP
>
PAGE DOWN
Summary of Contents for IV-110TX-SN
Page 2: ......
