Innovative DisplayWorks
G-77
Changing Electric Impulse Cooler Graphics:
7
5
Lay the body of the cooler on its side to access
components.
6
To re-assemble the cooler
align the notch at base of the
body with the cooler cord.
Then reverse steps 1-5.
4
The body of the cooler can now be worked free from the frame.
2
Wedge the graphic under the plastic frame of the cooler.
3
Remove the covering on the
double-stick tape to adhere
the graphic in place.
1
Place graphic around barrel, making sure to align the grill holes in the graphic
with the grill holes on the cooler to allow proper ventilation for the cooler.
