Instruction Manual
Innovative DisplayWorks
RCM-2
6
Accessing Compressor Compartment:
Changing Electric Impulse Cooler Graphics:
7
BEVERAGE STORAGE
1
Do not overload the cooler beyond the red limitation line.
2
Leave adequate space between beverage cans to allow air circulation.
3
This cooler is primarily for storing beverage cans and plastic bottles. Avoid putting glass containers in the cooler.
4
All beverage products should be properly sealed to avoid leaking into the cooler.
MAINTENANCE
Accessing Inner Fan:
1
Remove the basket from the inside of the cooler.
2
. Using a Philips screwdriver, unscrew (4) screws at the cover of inner fan.
3
Remove the inner fan cover.
4
Service or change inner fan.
5
Reverse steps 1-4 after maintenance.
2
Remove the grill
3
Replace or service the parts in the compressor
compartment.
4
Reverse steps 1-3 after maintenance.
1
Using a Philips screwdriver, unscrew (2) screws at the bottom of grill.
2
Wedge the graphic under the plastic frame of the cooler (sides
and bottom) and the magnetic strip.
3
Adjust the graphic to the correct
position.
1
Place graphic against the face of the cooler, open the top magnetic strip.
