15
九. 操作使用方法 Operation Remarks
1.
行走部變速前進
2
段
,
後退
2
段耕耘部刀具轉速
2
段依作業適用選擇變速
The speed change for the Run Body has 2 forward and 2 reverse speed . The
rotational speed for the Till Part, total is 4 speeds. Depend on the operating condition
to select the speed
2.
引擎轉速之控制在把手架右側上的加油座推桿
,
向左側推為加速
,
向右側推減
速
Engine running speed can be adjust from an Accelerator which locate on the right
side of handle bracket. Accelerator to the right for higher speed running,;
Accelerator to the left for lower speed running.
3.
中耕寬度依作業需要可增減左
,
右兩側刀具
1
節組最窄
22cm ,
第
2
節連接
最寬
42cm (
另有第
3
節刀具組可供選配
,
耕作寬度提升至
61cm)
Tillage width can be adjusted in accordance with the operation, then add or
remove one section of blade(22cm) in the both on left and right side. The widest
blade width for second section is 42cm( 3
rd
section blade for option , Tillage width
can be increase to 61cm )
4.
耕作深度可調整尾輪高低來控制
,
尾輪調低可使耕作深度加深
,
尾輪調高耕作
深度愈淺
,
尾輪調整把手可旋轉微調耕作深度
Tillage depth can be adjusted via the height setting of the real wheel. Lower the real
wheel will deeper the Tillage depth
；
Raise the real wheel will decrease Tillage depth.
Guide Wheel adjustment handle can be turning for slightly adjusted the tillage depth.
