Industrial Electronic Engineers, Inc.
SIZE
A
CODE IDENT NO.
05464
S036X2–XXX–XXXXX
Van Nuys, California
SCALE N/A
REV
N
SHEET 26 of 49
04/10/02
4.1
Numeric Order Control Codes (Cont.)
[A
0
(RS) = High for the following Control Codes]
Code
Name
Described in Section
30h
Set Display Screen or Column Brightness Level
4.5
Screen Control Codes
31h
Begin Blinking Character(s)
4.5
Screen Control Codes
32h
End Blinking Character(s
)
4.5
Screen Control Codes
33h
Blank Display Screen
4.5
Screen Control Codes
34h
Unblank Display Screen
4.5
Screen Control Codes
+35h
Comma/Period/Triangle Function
4.5
Screen Control Codes
36h
Erase Line data With End Blink
4.5
Screen Control Codes
37h
Set Carriage Return and Line Feed Definitions
4.5
Screen Control Codes
38h
Underbar On
4.2
Cursor Control Codes
*
39h
Underbar Off
4.2
Cursor Control Codes
*
3Ah
Select Right to Left Data Entry
4.5
Screen Control Codes
3Bh
Select Left to Right Data Entry
4.5
Screen Control Codes
3Ch
Screen Saver On
4.5
Screen Control Codes
3Dh
Screen Saver Off
4.5
Screen Control Codes
3Eh
Execute Self–test
4.6
Miscellaneous Codes
3Fh
Terminate Self–test
4.6
Miscellaneous Codes
*
Applies to 036X2–151–05240 & 036X2-160-05440 only. Unassigned for all other models.
+
Applies to 036X2-121-11120 only. Unassigned for all other models.
While unassigned Control Codes have no function, they are viewed as activity if received by the display and
will cause the Screen Saver function to reset.
CAUTION
While the display software will ignore erroneous single
byte control codes, errors in multibyte commands will
cause the software to “jump” out of the control mode.
