miniSPIN
10 - 45
Translation of the original instructions | EN
IEF
-
Werner GmbH | Wendelhofstraße 6 | DE-78120 Furtwangen | www.ief-werner.de
G
en
er
at
ed
b
y:
R
ei
ch
el
t F
ra
nk
|
M
A
N
_E
N
_1416190_
m
in
iS
P
IN
_R
1b
.d
oc
2.2
General Warning Notes
The miniSPIN component must only be commissioned by specialists who have received safety-
technical instruction and are able to assess potential dangers.
Furthermore, all chapters of this operating manual must have been read and understood
completely.
DANGER
Warning of dangerous electrical voltage.
The component must be powered down for all assembly, disassembly or repair work.
Non-observance of the safety provisions may cause death.
WARNING
miniSPIN-components must always be operated with protective
devices.
The miniSPIN-component always has to be operated in connection with suitable safety
devices (e.g., safety cell, protective room, protective housing, light curtain).
ATTENTION
Do not remove plugs or clamps when live.
Motor connectors or clamps must not be inserted or disconnected when live. Risk of
burning of the contacts and risk of flying sparks.
ATTENTION
Warning of hot surface.
During operation, the heated drive/cover may cause skin burns if touched. Install a
protective device, if possible! Do not touch the marked areas or wait for an adequate
cooling time.
Observe the Declaration of Incorporation (see section Declaration of Incorporation, page 7).
