３１
ACCURA9/9L INSTRUCTION MANUAL
10
Empty Detect Level Setting Screen
*** Empty Level ***
Ch 00
Empty Level 10
Shot Stop OFF
Memorizing the empty level:
Enter the empty level.
Adjustable the range from 00 to 99.
１０ ：
Sampling position at the bottom
level
11 or more :
Set the level higher than the
sampling level
9 or lesss
：
Set the level lower than the
sampling level.
Enter the command to
‘Shot Stop’
to continue or to
stop dispensing by the cursor
（↑、↓）
at the time of
‘Empty Alarm’ .
ON :
Stop to dispense
OFF :
Continue to dispense
After saving the data by
RETURN key
,
D. SAMP
function setting screen is shown.
11
D.Samp Function Setting Screen
*** D.Samp Menu ***
Ch 00 Bot̲Level ON
Top̲Level ON
Emp̲Level ON
In order to use the ‘Empty Alarm’ function, set
Emp_Level ON on the ‘D.SAMP’ screen.
If setting OFF, the Empty Alarm function doesn‘t
work.
Check the Empty Level:
Check at the shot screen to fill the shot-material in the
barrel a bit more than the Empty Alarm level in order
to detect the material balance functionally.
At Auto Mode, continue to dispense by
SHIFT+
/OFF
key.
The empty balance level should be adjusted at
Empty
Level.
Procedure to be downloaded the vacuum condition except the level compensation
