background image

 

 
 
 
 
 
 
 
 
 
 
 
 
 
IEI SUPPORT URL 

https://new.ieiworld.com/en/online_support_form/index.php 

 
COMPLIANCE 
 

 

This equipment has been tested and found to comply with specifications for CE marking. If the user modifies 
and/or installs other devices in the equipment, the CE conformity declaration may no longer apply. 
 

 

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 

 

This device may not cause harmful interference, and 

 

This device must accept any interference received, including interference that may cause 
undesired operation. 

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to 
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. This equipment generates, uses, 
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction 
manual, may cause harmful interference to radio communications. Operation of this equipment in a 
residential area is likely to cause harmful interference in which case the user will be required to correct the 
interference at his own expense. 
 

 

According to the requirement of the WEEE legislation the following user information is provided to customers 
for all branded IEI Electronics products subject to the WEEE directive. 
This symbol on the product or on its packaging indicates that this product must not be disposed of with your 
other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over 
to a designated collection point for the recycling of waste electrical and electronic equipment. The separate 
collection and recycling of your waste equipment at the time of disposal will help to conserve natural 
resources and ensure that it is recycled in a manner that protects human health and the environment. For 
more information about where you can drop o- your waste equipment for recycling, please contact your local 
city office, your household waste disposal service or the shop where you purchased the product. 

 

 

 

Headquarters 

威強電工業電腦股份有限公司

 

IEI Integration Corp. 

22161

新北市汐止區中興路

29

 

No. 29, Zhongxing Rd., Xizhi Dist.,   
New Taipei City 22161, Taiwan 

TEL: +886-2-86886-2-26902098 
FAX: +886-2-66160028 
sales@ieiworld.com 

 

www.ieiworld.com

 

America 
IEI Technology USA Corp. 

138 University Parkway, Pomona,   
CA 91768, USA 

Tel:+1-909-595-2819 
Fax:+1-909-595-2816 
sales@usa.ieiworld.com 
usa.ieiworld.com

 

China 

威强电工业电脑

  IEI Integration (Shanghai) Corp. 

上海市闵行莘庄工业区申富路

515

 

No. 515, Shen Fu Rd., Xin Zhuang Industrial 
Develop Zone, Shanghai, 201108, China 

Tel:+86-21-3116-7799 
Fax:+86-21-3462-7797 
sales@ieiworld.com.cn 
www.ieiworld.com.cn

 

 

 

Copyright ©2019 IEI Integration Corp. All rights reserved       

 

 

Summary of Contents for ECA-100











Reviews: