GRAND-C422-20D-H
Page 5
1.4.1 LED Indicator Specifications
The LED indicators of the GRAND-C422-20D-H indicate the system status and
information. The following table lists the front LED indicator behavior. Note that the
following information is applicable only when users have properly installed the hard drive,
and connected the system to the power supply.
LED
Color
LED Status Description
1
10GbE
Green
Green
The 10GbE port functions normally.
2
System
Status
Red/Green
Red
1. The hard drive is invalid.
2. The disk volume has reached its full capacity.
3. The disk volume is going to be full.
4. The system fan is out of function.
5. An error occurs when accessing (read/write) the
disk data.
6. A bad sector is detected on the hard drive.
Green
The system is ready.
Deep flashes
of orange
The system is in sleep mode.
Off
All the hard drives are in standby mode.
3
LAN
Orange
Orange
The disk data is being accessed from the network
and a read/write error occurs during the process.
Flashes
orange
The system is connected to the network.
4
Storage
Expansion
Port Status
Orange
Off
No expansion enclosures are detected.
Orange
Expansion enclosures are detected.
5
HDD
Red/ Green
Flashes red The NAS is being accessed from the network.
Red
A hard drive read/write error occurs.
Flashes
green
The disk data is being accessed.
Green
The hard drive can be accessed.
Summary of Contents for GRAND-C422-20D-H
