IBX-660 Industrial Edge Storage Server
Page 13
3.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the IBX-660
may result in permanent damage to the IBX-660 and severe injury to the
user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the WAFER series motherboard and the power module. (Dry climates are
especially susceptible to ESD.) It is therefore critical that whenever the IBX-660 is opened
and any electrical component handled, the following anti-static precautions are strictly
adhered to.
Wear an anti-static wristband
: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
Self-grounding
: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
Use an anti-static pad
: When configuring the IBX-660, place it on an
anti-static pad. This reduces the possibility of ESD damaging the IBX-660.
3.2 Installation Precautions
CAUTION:
The IBX-660 series has more than one power supply connection point.
To reduce the risk of electric shock, disconnect all power sources before
installing or servicing the IBX-660 series.
During installation, be aware of the precautions below:
Summary of Contents for IBX-660 series
