background image

 

 

IDS-310-AL Embedded System 

Page 51 

4.3.9 IEI Feature 

Use the 

IEI Feature

 menu (

BIOS Menu 14

) to configure One Key Recovery function. 

Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. 

 

Advanced 

 

 

 

 

 

 

 

iEi Feature 

 

Auto Recovery Function 

[Disabled] 

 

 

Auto Recovery Function 

Reboot and recover 

system automatically 

within 10 min, when OS 

crashes. Please install 

Auto Recovery API 

service before enabling 

this function 

 

---------------------- 

 



: Select Screen 

 

: Select Item 

Enter Select 

F1  General Help 

F2  Previous Values 

F3  Optimized Defaults 

F4  Save  

ESC  Exit 

Version 2.18.1263. Copyright (C) 2019 American Megatrends, Inc. 

BIOS Menu 14: IEI Feature

 

 

Auto Recovery Function [Disabled] 

Use the 

Auto Recovery Function

 BIOS option to enable or disable the auto recovery 

function of the IEI One Key Recovery. 

 

Disabled 

D

EFAULT

 

Auto recovery function disabled 

 

Enabled 

 

Auto recovery function enabled 

Summary of Contents for IDS-310-AL



















































































































Reviews: