IOVU-207AR-RK39 Panel PC
Page 9
To unpack the panel PC, follow the steps below:
WARNING!
The front side LCD screen has a protective plastic cover stuck to the
screen. Only remove the plastic cover after the system has been
properly installed. This ensures the screen is protected during the
installation process.
Step 1:
Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 2:
Open the box.
Step 3:
Lift the IOVU-207AR-RK39 out of the box.
Step 4:
Make sure all the components listed in the packing list are present.
Step 0:
2.1 Packing List
NOTE:
If any of the components listed in the checklist below are missing, do
not proceed with the installation. Contact the IEI reseller or vendor the
IOVU-207AR-RK39 was purchased from or contact an IEI sales
representative directly by sending an email to
The IOVU-207AR-RK39 is shipped with the following components:
Quantity
Item
Image
1
IOVU-207AR-RK39 panel PC
Summary of Contents for IOVU-207AR-RK39
