background image

 

 

ITG-100AI Embedded System 

Page 44 

4.4.1 North Bridge Configuration 

Use the 

North Bridge Configuration

 menu (

BIOS Menu 15

) to configure the Intel IGD 

settings. 

Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc. 

 

 

Chipset 

 

 

 

 

Memory Information 

 

Total Memory 

8192 MB(DDR3L) 

 

Memory Slot0 

8192 MB(DDR3L) 

 

> Intel IGD Configuration 

 

 

Intel IGD Configuration 

 

 

 

 

--------------------- 



: Select Screen 

 

: Select Item 

Enter Select 

+/-:  Change Opt. 

F1:  General Help 

F2:  Previous Values 

F3:  Optimized Defaults 

F4:  Save & Exit 

ESC: Exit 

Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc. 

BIOS Menu 15: Northbridge Chipset Configuration

 

 

Memory Information 

The 

Memory Information

 lists a brief summary of the on-board memory. The fields in 

Memory Information

 cannot be changed.   

4.4.1.1 Intel IGD Configuration 

Use the 

Intel IGD Configuration

  menu (

BIOS Menu 16

)  to configure the video device 

connected to the system. 

Summary of Contents for ITG-100AI

























































































Reviews: