background image

 

 

KINO-DBT Mini-ITX SBC

Page 84 

Î

 

8 D

EFAULT

 

Sets the data bits at 8. 

Î

 

Parity [None] 

Use the 

Parity

 option to specify the parity bit that can be sent with the data bits for 

detecting the transmission errors. 

Î

 

None D

EFAULT

 

No parity bit is sent with the data bits. 

Î

 

Even  

The parity bit is 0 if the number of ones in the data 

bits is even. 

Î

 

Odd  

The parity bit is 0 if the number of ones in the data 

bits is odd. 

Î

 

Mark  

The parity bit is always 1. This option does not 

provide error detection. 

Î

 

Space  

The parity bit is always 0. This option does not 

provide error detection. 

Î

 

Stop Bits [1] 

Use the 

Stop Bits

 option to specify the number of stop bits used to indicate the end of a 

serial data packet. Communication with slow devices may require more than 1 stop bit. 

Î

 

1 D

EFAULT

 

Sets the number of stop bits at 1. 

Î

 

2  

Sets the number of stop bits at 2. 

5.3.6 CPU Configuration 

Use the 

CPU Configuration

 BIOS menu (

BIOS Menu 10

) to view detailed CP

specifications and configure the CPU. 

Summary of Contents for KINO-DBT Series






































































































































Reviews: