8
Mounting the System – Wall Mount
WARNING:
Use suitable mounting apparatus and be sure to secure the screws of
the mounting apparatus tightly to avoid risk of injury.
To mount the medical panel PC onto the wall, please follow the steps
below.
Step 1:
Select the location on the wall for the wall-mounting bracket.
Step 2:
Carefully mark the locations of the four screw holes in the bracket
on the wall.
Step 3:
Drill four pilot holes at the marked locations on the wall for the
bracket retention screws.
Step 4:
Align the wall-mounting bracket screw holes with the pilot holes.
Step 5:
Secure the mounting-bracket to the wall by inserting the retention
screws into the four pilot holes and tightening them.
Step 6:
Insert the four monitor mounting screws provided in the wall mount
kit into the four screw holes on the real panel of the medical panel
PC and tighten until the screw shank is secured against the rear
panel.
Summary of Contents for POC-W22A-H81
Page 4: ...3 Front Panel Side Panel ...
Page 5: ...4 Bottom Panel Rear Panel ...
