15
Safety Precautions
WARNING:
The precautions outlined below should be strictly followed. Failure to
follow these precautions may result in permanent damage to the
POC-W24C-ULT3
.
General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
To prevent the risk of electric shock, make sure power cord is
unplugged from wall socket. To fully disengage the power to the unit,
please disconnect the power cord from the ac outlet. Refer servicing
to qualified service personnel. The AC outlet shall be readily available
and accessible.
Users must not allow SIP/SOPs and the patient to come into contact
at the same time.
Grounding reliability can only be achieved when the equipment is
connected to an equivalent receptacle marked “Hospital Only” or
“Hospital Grade”.
Follow the electrostatic precautions outlined below whenever the
POC-W24C-ULT3 is opened.
Make sure the power is turned off and the power cord is disconnected
whenever the POC-W24C-ULT3 is being installed, moved or
modified.
Do not apply voltage levels that exceed the specified voltage range.
Doing so may cause fire and/or an electrical shock. Use a power cord
that matches the voltage of the power outlet, which has been
approved and complies with the safety standard of your particular
country.
Electric shocks can occur if the POC-W24C-ULT3 chassis is opened
when the POC-W24C-ULT3 is running. To avoid risk of electric shock,
this equipment must only be connected to a supply mains with
protective earth.
Do not drop or insert any objects into the ventilation openings of the
POC-W24C-ULT3.
If considerable amounts of dust, water, or fluids enter the
POC-W24C-ULT3, turn off the power supply immediately, unplug the
power cord, and contact the POC-W24C-ULT3 vendor.
DO NOT:
o
Drop the POC-W24C-ULT3 against a hard surface.
o
Strike or exert excessive force onto the LCD panel.
Summary of Contents for POC-W24C-ULT3
Page 4: ...3 Front Panel Bottom Panel ...
Page 5: ...4 Left Panel Rear Panel ...
