prox.pad Plus IR Access System Installer Guide
Action Desired
Press
Details
Program User - Card Only
By Presenting Card
50 # user type # user location # **
<present card>
User Types:
0 – Toggle
1 – Standard
3 – Lockout
4 – Extended
5 – Single Use
6 – Relock
7 – Emergency
8 – Communications Unlock
Program User – Card Only
Without Presenting Card
51 # user type # user location #
card PIN * card PIN *
User Types:
0 – Toggle
1 – Standard
3 – Lockout
4 – Extended
5 – Single Use
6 – Relock
7 – Emergency
8 – Communications Unlock
For 26-bit Cards only.
The card PIN appears on the card
(Facility code must be entered first;
see 32 # 4 # command)
Program User – Code OR Card
By Presenting Card
52 # user type # user location #
code * repeat code * <present
card>
User Types:
0 – Toggle
1 – Standard
3 – Lockout
4 – Extended
5 – Single Use
6 – Relock
7 – Emergency
8 – Communications Unlock
Program Consecutive Users – Card
Only By Presenting Cards
53 # user type # start user # **
<present card> <present card> ...
User Types:
0 – Toggle
1 – Standard
3 – Lockout
4 – Extended
5 – Single Use
6 – Relock
7 – Emergency
8 – Communications Unlock
Simply present one card after
another.
Enable/Disable Users
56 # enable/disable # user location
# **
Enable = 0
Disable = 1
Program Consecutive Users – Card
Only Without Presenting Cards
57 # number of users # user
location # card PIN * card pin *
“Number of Users” = total number of
cards to be entered; card PIN
appears on card; a facility code
must be entered first (see command
32, option # 4)
Page 30 of 32 Document # 6105681, Rev 1.1, D2a
