RACK-360 QIG IEI Integration Corp. Page 1
RACK-360G/RACK-360E
4U Rackmount Chassis
Version: 2.30
Quick Installation Guide
ABOUT THE RACK-360
The 4U, heavy-duty steel RACK-360 AT/ATX compatible
rackmount industrial chassis is designed to operate reliably in
industrial environments where it will be exposed to dust, wide
temperature variations, and shocks and vibrations, among other
things.
NOTE
Model variations are listed below:
RACK-360G:
with paint coating inside
RACK-360E:
without paint coating inside
SPECIFICATIONS
Form Factor:
Standard 4U, 19" wide
SBC Form Factor:
Full-size, slot CPU cards
Construction:
Heavy-duty steel
Slots Number:
14-slot (360G & 360E),
7-slot (360GxATX & 360ExATX)
Cooling(s):
1 x 12cm fan
Drive Bay Combinations:
o 3 x 5.25" Optical drives
o 2 x 5.25" Optical 1 x 3.5" HDD (hard disk drive)
+ 1 x 3.5" FDD (floppy disk drive)
o 2 x 5.25" Optical 2 x 3.5" FDDs
Dimensions (DxWxH):
o 435.5mm x 431mm x 176mm
Operating Temperature:
0~50°C
Relative Humidity:
5~95%
Vibration:
o 5-17Hz, 0.1" double amplitude displacement
o 17-640Hz, 1.5G acceleration peak to peak
Shock:
10G acceleration peak to peak
PACKING LIST
When you unpack the chassis, make sure the following items
have been shipped.
1 x Quick Installation Guide
1 x Power Cord
2 x Handles and handle plates
1 x Screw Set
2 x Keys
DETAILS OF INCLUDED SCREWS
The attached screw set includes five types of screws. Screws
used for chassis installation are shown below.
1 2 3 4 5
Peripherals/Parts
Screw Labels in the Picture Above
5.25" Disk Drives
5
3.5" FDD
5
3.5" HDD
1
2.5" HDD
4
Power Supply Unit
1
Rackmount Bracket
3
Backplane
3
2
Table 1: Screws for Peripheral/Parts
