Print More Materials, All For Application
— 21 —
Step 7
1.
Click on leveling
2.
Wait for the machine to automatically find the 49
test points and finish testing
3.
Remove the automatic leveling aid and turn the
knob back to "1".
Step 8
1.
Control Z-axis descent by using different strokes
2.
Make the nozzle 0.1mm away from the platform
Step 9
1.
Use the integrated adjustment screw and the limit
height fine adjustment screw together
2.
Enable the Z negative limit just trigger, and start the
print test
(Please see the detailed steps in the use of video)
Step 10
1.
When a power failure trip occurs during use.
2.
Disconnect the connector of the emergency stop
trigger device
3.
Open the electrical box and close the gate of
leakage protection
Overall
High Limit
度 细 微 调
Z-Negative:
Limit
Emergency
Stop