10 - DRILLING MACHINE
SIR 52 MS52 P/F
EN
10 - Pag. 11 / 20
F21 Button STEP BY STEP OPERATION
Press F21 to activate Step by Step operation.
After pressing the button, the button led will light up. Press F21 to restore drilling machine
working cycle. In case F22 lights up because of signal failure of microswitch sensors, press
both F21 and F22 at the same time to restore drilling machine working cycle.
F22 Button SENSOR DEACTIVATION
When the button led lights up, the drilling machine sensors can be deactivated by pressing
this button (For example, if no bar is present, it is possible to press this button for step by
step operation).
F23 Button SPINDLE RETURN
By clicking this button when the spindle has not completely left the bar being machined,
the spindle returns to the rest position.
To carry out the above mentioned operation, the drilling machine working cycle must be
over, could also be displayed or keep button F25 pressed.
Keeping button F23 pressed, it is possible to reach the retracted position to replace the
spindle tip, the inserts and the gripper.
Summary of Contents for SIR52 MS52 P
