2
OPERATING INSTRUCTIONS
Spidy Cable Reel
7
2
Safety Information
Always comply to the letter with the safe-
ty information and warnings given in
these operating instructions.
2.1
Intended Use
The cable reel with spring return is in-
tended exclusively for connecting and / or
extending the supply of power to battery
systems and (depending on the device
type) of compressed air to the braking
systems of vehicles.
The 12/24 V cable reel with or without a
compressed air supply is for supplying the
battery testing and charging system (or a
similar device) that is installed in the vehi-
cle hall.
The 230 V cable reel with or without a
compressed air supply is for supplying the
battery testing and charging system (or a
similar device) that is installed in the vehi-
cle.
The cable reel with spring return is de-
signed to be used manually.
Any other use is not the intended use and
voids the warranty.
2.2
General Safety
Information
This cable reel is not intended for use by
anybody (including children) with physical,
sensory or mental challenges, who are
inexperienced or do not have adequate
knowledge unless they are supervised by a
person who is responsible for their safety
or who gives them instructions on using
the cable reel.
Do not allow any children to handle the
cable reel without supervision.
Installation, dismantling and service work
may only be carried out by qualified per-
sons who have been assigned to carry out
this work.
Hold the cable tight when pulling it out or
reeling it back; otherwise, the spring
return can lead to the cable snapping
back and causing injury.
Do not overtension the cable (e.g. by
hanging weights from it). Do not use
force to pull the cable, since this can
damage the device.
When reeled-up, the cable can become
very hot in the case of severe inductive
loading. If under heavy load, pull the cable
out completely.
