The informat ion conta ined in th is docu ment is the property of Automat ic Syst ems and is conf ident ial. The rec ip ient is forb idd en to use it for any purpose ot her
than for the use of the products or the execut ion of the project to wh ich th ey refer or to commu nicate it to th ird parties w ithout the pr ior wr itten conse nt of
Automat ic Systems. Document sub ject to change w ithout advance not if icat ion .
SL93x + TBV327-MT-EN
p. 4/39
1. SAFETY INSTRUCTIONS
The SL93x, PPV323 and TBV327 gates and turnstiles are intended for the access control of users
and cannot be otherwise used without risk for the user or for the integrity of the equipment.
They are intended for light traffic applications (cf. technical specifications, ch.2.1. )
It is mandatory to let the equipment complete its opening and closing cycles automatically (without
pushing the obstacle) to avoid untimely out of order.
All operations on the equipment must be carried out by qualified personnel. Any unauthorized
operation, or operation carried out by a technician not qualified on this product, voids the
manufacturer’s guarantee automatically.
Access to the mechanism must be limited to personnel aware of the electrical and mechanical risks
that are incurred by negligent action.
If possible, disconnect the electrical supply before opening the enclosure.
Otherwise, turn the power off by means of the circuit breaker located on the power board (ch.5.2. ).
WARNING
: In both cases, wait 5 minutes before working inside the equipment (capacitors
discharge)!
Any internal element likely to be put under voltage or to move must be handled with caution.
The equipment is configured in a minimal risk mode for its users. Any changes to the parameters
must be carried out with full knowledge of the facts by qualified personnel and are not the
responsibility of
Automatic Systems
.
