The informat ion conta ined in th is docu ment is the property of Automat ic Syst ems and is conf ident ial. The rec ip ient is forb idd en to use it for any purpose ot her
than for the use of the products or the execut ion of the project to wh ich th ey refer or to commu nicate it to th ird parties w ithout the pr ior wr itten conse nt of
Automat ic Systems. Document sub ject to change w ithout advance not if icat ion .
SL93x + TBV327-MT-EN
p. 26/39
5.10. Control unit menu (program v5.36)
The 3 pushbuttons correspond to the text on the display.
When not in the menu, buttons
<
and
>
start a clockwise and counter-clockwise rotation of the obstacle.
When powering on the gate, the software versions are displayed for a few seconds, then the following
parameters:
-
Position of the obstacle with regard to its closed position.
-
Serial n° of the CPU board, alternating with the IP address of the board if the IP interface
option is fitted.
-
The obstacle rotation speed.
-
Any error messages (
Enter
the menu by pressing the center button (
MENU
) => the obstacle unlocks.
Note
: do not enter the menu before the serial n° is displayed. This would lose the customized
configuration and return to the factory settings.
Move
in the various sections by means of button
>
.
Choose
one parameter of a series by means of button
CHG
.
Modify
the parameter value by means of buttons
<
and
>
.
The modifications
validation
is automatic.
Exit
the menu via
QUIT
section of the menu or by pressing the button
>
for at least 3 s.
Parameter
Description
PRODUCT TYPE
Select the equipment model (cf. serial plate 15, ch.2.2. ):
-
PPV 323
-
TBV 327
-
SL930
-
SL931
-
SL932
-
Unknown
Note
: to be recognized by the Smart n' Slim monitoring panel, all
models must be declared as SL930.
