Hardware Operations
1230B0049701
2-29
2.10
Tape Drive (Optional)
The location of tape drive on the server chassis is shown below:
Figure 2-51 Tape Drive Location
Reminder
Before you remove or install the tape drive, please follow the steps below:
Step 1: Make sure the server is not turned on or connected to the AC power. To power off
the server, see “2.1.1 Power Off”.
Step 2: Remove the chassis cover. To remove the cover, see “2.2 Chassis Cover”.
Step 3: Disconnect all necessary cable connections.
2.10.1
To remove the tape drive
Loosen the thumbscrew along the direction of the arrow.
Push the ODD cage out of the chassis.
Figure 2-52 Pushing out the ODD Cage
Summary of Contents for ISR2500-6
Page 3: ......
Page 103: ...Daughter Cards China RoHS Regulations Appendix...