iesy GmbH
www.iesy.com | sales@iesy.com | Tel.: +49 (2354) 70655 0
Local court Iserlohn | HRA 9826 |
USt-IdNr
: DE339671635 | Managing Director: Dipl.-Ing. Martin Steger
Seite 16 von 27
User Manual V-180131-BHA00
4
Operating SDoT Server V3B
4.1
Replacing the Audit-Hard Disk – H1
The SDoT Servers V3B has an audit hard disk that is installed in the form of a removable hard disk.
This removable hard disk can be replaced.
For information on the status and changing of the audit hard disk, refer to the user manual of the
SDoT Product.
Follow the steps below to securely change the audit disk
1.
log in to the SDoT Server V3B as an auditor
2.
open Status Audit system
3.
click on System » Change HDD
the entry next to the third diode indicates a change
4.
confirm the security prompt with Change HDD
the SDoT product switches to maintenance mode
the removable hard drive status indicator on the dashboard changes from red to blue
a note is displayed on the screen that the audit hard disk is enabled
5.
remove the removable hard disk and replace it with an empty disk
6.
lock the slide-in module again
The SDoT product sets up the new hard drive as audit storage. The SDoT product independently
switches to operational mode.
Keep the data carrier in a safe place and ensure that the stored data is handled in accordance with
security requirements.
