iesy GmbH
www.iesy.com | sales@iesy.com | Tel.: +49 (2354) 70655 0
Local court Iserlohn | HRA 9826 |
USt-IdNr
: DE339671635 | Managing Director: Dipl.-Ing. Martin Steger
Seite 17 von 27
User Manual V-180131-BHA00
4.2
Starting the SDoT Server V3B
After installing the SDoT Server V3B in a 19" IT cabinet and connecting it to the power supply using
the IEC cables, the device can be put into operation.
The basic steps for operating the SDoT Server V3B are described below. For detailed information,
refer to the manual for your SDoT product.
Put the SDoT Server V3B into operation:
1.
press the on/off switch P1
2.
follow the indication of the LC touch display T1
3.
enter the four- or six-digit system PIN
PIN Entry on the LC Touch Display
a.
press the arrow keys above and below each PIN field to select the character
b.
as you type, the characters in this field are visible and remain so for a few seconds after
you type
c.
the PIN may only contain alphanumeric characters, i.e. the numbers from 0 to 9 and the
capital letters from A to Z
4.
press the checkmark key at the bottom right of the LC touch display to confirm the PIN entry
If you have entered an incorrect PIN, the display will show PIN incorrect.
After the third incorrect entry, the SDoT product locks the LC touch display
