iesy GmbH
www.iesy.com | sales@iesy.com | Tel.: +49 (2354) 70655 0
Local court Iserlohn | HRA 9826 |
USt-IdNr
: DE339671635 | Managing Director: Dipl.-Ing. Martin Steger
Seite 6 von 27
User Manual V-180131-BHA00
1.6
Operating Installation Side
Operating temperature: 0°C …+45°C
make sure that the fans and ventilation openings are not covered up
the permissible relative humidity at 45°C is 95 % (non-condensing) must be observed
the device must be protected from direct sunlight
1.7
Service and Cleaning
Clean the housing with a soft and slightly damp cloth. Never use solvents, as these could damage
the labelling or the housing. When cleaning, make sure that no liquid gets into the module or onto
the connections.
The fans and the redundant power supply provide interfaces that can be used for monitoring the
operating status. In the event of a fault, the corresponding component must be replaced.
1.8
Product Liability
In the following cases, the intended safety of the device may be impaired.
Liability for the device function then passes to the operator:
the device is not used according to the operating instructions
the device is used outside the described field of application (intended use)
unauthorized changes are made to the device by the operator